Prepare absorbent surfaces with Meexe Primer 100 before applying microcement on materials such as plaster or drywall. Our acrylic primer, formulated based on water, has a colorless finish when dry.
The ready-to-use primer can be applied with a brush or microfiber roller. Meexe Primer 100 dries very quickly, so in only 30 minutes you can work with the microcement to give your surfaces your touch of texture and color.
Touch Dry
Between 30 and 60 minutes depending on environmental conditions
pH
between 8 and 9
Viscosity
10-11 s (Ford Cup 4)
1
CLEAN THE SURFACE
Prepare and clean the surface to be coated. Remove dirt and grease residue before applying the primer.
2
APPLY THE PRIMER
Add a layer of Meexe Primer 100 and let it dry before starting to apply the microcement. It will be ready in 30 minutes, but do not let more than 24 hours pass.
3
PROTECT YOURSELF AND CHECK THE ENVIRONMENT
Although our microcement primer is free of pollutants, it is advisable to take into account some simple measures for its application. As for the environment, it is advisable that the area is ventilated and the temperature is kept between 10 and 30 ºC. It is advisable for the professional applicator to use rubber gloves and protective glasses.
4
EXTEND THE LIFE OF THE PRODUCT
Close the lid of the product container after each use. This way, the microcement primer will remain suitable for later use.
5
To get the most out of the product, close the lid after each use.
This is a good way to prevent the primer from drying out.